







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why North Las Vegas Homeowners Choose Kohler Construction
We provide independent Kohler fixture and bathroom construction service in North Las Vegas: repair, replacement and full remodel work on Kohler faucets, toilets, shower wall systems and cast-iron tubs. What separates our Kohler work is that we approach it fixture by fixture, matching the cartridge, valve or trim to the actual product instead of forcing a universal part to fit. We are not affiliated with, sponsored by or authorized by Kohler. We’re an independent provider, and we say so plainly. Our technicians have up to 11 years of experience with the brands homeowners here actually own, and we handle the whole scope of a Kohler bathroom under one contractor. Call (833) 734-2032 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust North Las Vegas Construction for Your Kohler Construction?

Kohler fixtures are built to tight tolerances. A ceramic disc cartridge that’s a millimeter off, a fill valve set to the wrong refill level, a shower panel seam that isn’t seated square – these are the things that turn a good fixture into a recurring problem. Our technicians have learned where those tolerances bite because they work on these products regularly, not once a year on a remodel.
We also keep the work warranty-safe. That means using Kohler OEM cartridges, fill valves and trim kits where they’re available so the finish and fit stay right, and using quality aftermarket seals and supply lines only on hidden components where fit isn’t affected. When we open a wall or pull a fixture, we document what we find so there’s a clear record of the condition before and after. Nothing about that record depends on us being a Kohler dealer, because we’re not one. It depends on doing the repair correctly and leaving the fixture in a state Kohler’s own warranty terms can work with.
That’s the standard we hold across North Las Vegas, whether the job is a single running toilet or a full tub-to-shower conversion.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Kohler Construction Problems We Fix in North Las Vegas
Kohler products fail in recognizable ways. Here’s what we see most often in North Las Vegas homes, and why it happens.
- Seized or dripping Artifacts and Purist faucet cartridges. The ceramic disc cartridges in these faucet collections are precise, and they’re also sensitive to mineral scale. North Las Vegas water carries a heavy mineral load, and over time that buildup etches the disc faces and stiffens the lever. What starts as a stiff handle becomes a slow drip at the spout. A cartridge swap usually solves it, but only if the supply lines and aerator are cleared of the same sediment or the new cartridge fouls the same way.
- Memoirs and Premier toilets running continuously. A toilet that never stops refilling usually has two culprits working together: a worn flapper that no longer seals, and sediment in the supply line that keeps the fill valve from shutting off cleanly. In this climate the rubber in a flapper hardens faster than most homeowners expect, so a flapper that’s only a couple of years old can already be leaking past the rim.
- Choreograph shower wall panel seams wicking moisture. These panel systems depend on a clean, correctly cured caulk joint at every seam and at the pan. When the joint fails, water gets behind the panel and mildew develops along the caulk line. Resealing over a wet seam traps the moisture instead of stopping it, and the panel behind it keeps degrading.
- Chipped cast-iron tub finishes at the drain or overflow. Bellwether and Villager tubs have a durable enamel finish, but abrasive cleaners dull and eventually chip it, especially around the drain and overflow where the finish is thinnest. Installation stress – a tub set slightly out of level or tightened unevenly at the drain – can start the same chipping from underneath.
- Vanity top fit and sealing problems after a swap. A Kohler vanity top set onto cabinetry that wasn’t built for its dimensions leaves gaps at the back and sides, and those gaps collect splash water. The top itself is fine; the install is the failure. Dry-fit and a proper silicone bead at the wall and deck solve it.
Persistent drip from an Artifacts widespread faucet alongside an intermittently running toilet is the most common paired complaint we hear. The typical fix is unglamorous: pull the cartridge and check for scale damage, replace it with an OEM unit, rebuild the fill valve and flapper, test supply pressure, and flush the lines to clear sediment. If the shower panels show soft caulk joints with mildew already behind them, resealing usually isn’t the answer – replacing the affected panel or converting to a walk-in shower is.
Kohler Parts & Our Repair-vs-Replace Approach

On Kohler equipment, we use OEM cartridges, fill valves and trim kits where they’re available. That preserves the finish and the fit, and it’s the right call on visible parts. For hidden components – supply lines, seals, mounting gaskets – quality aftermarket parts do the job without any downside, and they often shorten the wait for a repair.
The repair-or-replace question comes down to where the water has been. A cartridge, a flapper, a fill valve, a chipped spot at a tub drain: those are repairs, and they’re worth doing. Once water has reached the substrate behind a Choreograph wall system or under a cast-iron tub that’s failed at the drain, honest advice usually points toward replacement. Chasing a seam that keeps wicking moisture costs more over a few years than doing it once right.
We’ll tell you which side of that line your fixture is on before any work starts, and the written estimate sets the final price. Call (833) 734-2032 to talk through what you’re seeing.
Our Kohler Service Process – Step by Step
- 1
Diagnosis. We identify the exact Kohler product and the part that’s failed before quoting. On a faucet that means pulling the handle and inspecting the cartridge for scale. On a toilet it means checking flapper seal, fill valve shutoff and supply-line sediment together, not one at a time.
- 2
Repair or install. Parts are matched to the fixture: OEM cartridge, OEM fill valve, OEM trim. On a remodel, we dry-fit tubs, panels and vanity tops before anything is sealed so out-of-square conditions show up early.
- 3
Test. Every repair gets a pressure and flow check, a flush to clear loosened sediment, and a run-through of the fixture’s full operation – fill, shutoff, drain, and the shower panel seams.
- 4
Warranty documentation. You get a written record of what was replaced and why, which is what you’ll want if a warranty question ever comes up with the manufacturer or on our own workmanship.
See the difference
Before
After
Before
After
Before
AfterKohler Products We Service & Install in North Las Vegas
We work across the Kohler product types that show up in North Las Vegas bathrooms: faucets and faucet collections, toilet series, shower wall panel systems, and cast-iron bathtubs. That covers the full bathroom, from a single cartridge replacement to a tub-to-shower conversion where the Kohler tub comes out and a walk-in shower goes in, and vanity work that has to line up with a Kohler top on standard cabinetry. We also handle the surrounding construction – tile, waterproofing, plumbing rough-in – so the fixture and the room around it are done by one contractor.
We Also Service These Brands
Kohler is one brand in a much broader roster at North Las Vegas Construction. We work with KraftMaid cabinetry on the surround, GAF roofing when the project reaches the roof line, PGT windows and doors on the exterior envelope, and Master Halco fencing on the property line. If a remodel touches multiple systems, one contractor relationship covers them. We specify the brand before the crew arrives.
FAQs – Kohler Construction Service in North Las Vegas

No. We are an independent Kohler service provider, not a dealer, and we’re not affiliated with or authorized by Kohler. We service and install Kohler fixtures using parts that fit them, and we’re upfront about that boundary in every estimate.
Yes. We use OEM Kohler cartridges, fill valves and trim kits where available, and quality aftermarket seals and supply lines for hidden components where fit and finish aren’t affected. That balance keeps the visible parts correct and keeps the repair moving.
Most single-fixture repairs finish in a single visit, and a full bathroom remodel or tub-to-shower conversion is scheduled across multiple days depending on scope, tile and waterproofing. Call (833) 734-2032 for a timetable tied to your specific project – estimates are free.
Faucets and faucet collections, toilet series, shower wall panel systems, cast-iron bathtubs, and the vanity work that surrounds them. If it’s a Kohler fixture in a bathroom, it’s in scope.
Correct service with parts that fit shouldn’t void a Kohler warranty, and we document what we replaced and why so there’s a clean record. Warranty terms are set by Kohler, so read them for your fixture. Call (833) 734-2032 with the model and we’ll talk through the work involved – estimates are free.
Typical estimates for the Kohler bathroom scopes we handle most often:
| Service | Typical Estimated Range |
|---|---|
| Tub-to-Shower Conversion | $3,255 – $9,300 |
| Walk-In Shower Installation | $4,185 – $11,160 |
| Shower Replacement | $2,790 – $7,905 |
| Bathroom Vanity Installation | $745 – $2,790 |
These are estimates. The written estimate sets the final price, so there are no changes once work starts. Call (833) 734-2032 for an exact quote – estimates are free.
A drip that survives a cartridge swap usually means scale or debris is still in the valve body, the aerator, or the supply lines feeding the faucet. A pro should inspect the valve seats for mineral damage, flush the lines, check supply pressure, and verify the replacement cartridge was seated square. Call (833) 734-2032 to get it diagnosed properly – estimates are free.
Only if the mildew is on the surface and the caulk joint hasn’t let water past it. Once moisture is wicking behind a seam, resealing traps it, and the panel or the substrate behind it keeps degrading. In that case, replacing the affected panel or converting to a walk-in shower is the more durable route. Call (833) 734-2032 and we’ll tell you which situation you’re in – estimates are free.
Small chips can be refinished, but a tub with enamel loss around the drain or overflow is usually better replaced – and during a tub-to-shower conversion the tub comes out anyway. Replacement avoids a refinish that fails again at the same thin spots. Call (833) 734-2032 for a conversion estimate – estimates are free.
Memoirs and Premier series show up in the post-2000 subdivision housing across North Las Vegas. The common failures are worn flappers that leak past the rim and fill valves that won’t shut off cleanly because of sediment in the supply line. Both are straightforward repairs.
Often, yes, but it depends on the cabinet dimensions matching the top’s footprint and the faucet drilling lining up with the cabinet’s plumbing. Dry-fitting before setting the top catches gaps at the wall and back that would otherwise collect water. Call (833) 734-2032 and we’ll check your cabinet before you buy. Estimates are free.
Book Your Kohler Service in North Las Vegas, NV
Kohler fixtures deserve service built around the actual product. We handle faucet cartridges, toilet fill valves, shower panel seams, tub conversions and vanity installs as one contractor in North Las Vegas, with a written estimate that fixes the price. Call (833) 734-2032. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at North Las Vegas Construction.












